Stainless Steel Twill Weave Wire Cloth
Twill Weave Wire Mesh: In the Twilled Woven Wire Mesh, the wires of the weft and the warp
intercross two above and two below, inverting the intersections of
the warp wire at an established distance, obtaining a rigid, stable
and robust type of wire mesh fabric. The pattern is staggered on
successive warp wires, giving the appearance of parallel diagonal
lines.
230 mesh twill weve stainless steel wire mesh including 230 wires
and openings of 1 inch. Using 0.036mm diameter wire, by twill
weaving, woven 230 mesh opening for 0.074mm liquid or gas filter.
This wire diameter and mesh with ratio reasonable, therefore weave
structure is very strong. After 13 whole weaving process, so that
the mesh surface flatness better. Material can easily bend by hand
and cut with scissors and laser. Commonly used for laboratories,
screen printing, and filters. This market grade mesh is woven from
a standard wire diameter which is heavier than the wire used to
weave bolting cloth.
| Mesh | Weave Pattern | Wire Diameter | Aperture | Open Area Rate |
| mm | Inch | mm | Inch | % |
| 230 | Twilled Weave | 0.036 | 0.0014 | 0.074 | 0.0029 | 45 |
1) Roll Size Roll Width: 36”, 48”, 1.0m Roll Length: 100ft, 30m
2) Cut in Pieces Rectangle shape, square shape, round shape and other required
shapes and sizes. |
Materials: SS304, SS304L, SS316, SS316L
| AISI | Chemical Composition of Several Stainless Steel Wires (%) |
| C | Si | Mn | P | S | Ni | Cr | Mo |
| 304 | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 8.00~10.50 | 18.00~20.00 | - |
| 304L | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 9.00~13.00 | 18.00~20.00 | - |
| 316 | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 10.00~14.00 | 16.00~18.00 | 2.00~3.00 |
| 316L | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 12.00~15.00 | 16.00~18.00 | 2.00~3.00 |
304 stainless steel: Most common stainless alloy used in wire
weaving. Excellent corrosion properties and can withstand
temperatures of 1100 Degrees F.
304L stainless steel: Similar properties as 304ss but lower carbon
content to permit better welding.
316 stainless steel: Similar properties to 304ss but is stabilized
by the addition of Molybdenum for increased resistance to chemical
corrosion.
316L stainless steel: Similar properties as 316ss but lower carbon
content to permit better welding.
Weaving Type: Twill weave
Features of Twill SS Weave Wire Mesh:
Superior corrosion and abrasion resistance;
Can resist to rust and bad weather;
High filter precision;
Durable and high strength;
Beautiful appearance.
Applications:
Crossed twilled wire mesh are basic components in the production of
filters, colanders for aliments, chemicals products, shielding,
mosquito nets, etc.
This weave allows the use of proportionately heavier wires in a
particular mesh count(number of openings per lineal inch) than is
possible in plain weave.
This cloth has a wide application capable of supporting greater
loads and finer filtrations.
Specifications:
| MESH Count | Diameter of Wire | Width of Opening | Open Area | Weight |
| % per | Pounds |
| per Inch | Inches | mm | Inches | mm | 100 Sq. Ft. | per 100Sq.Ft |
| 12 x 12 | 0.032 | 0.81 | 0.051 | 1.3 | 37.9 | 78.8 |
| 14 x 14 | 0.028 | 0.71 | 0.043 | 1.1 | 37 | 70.4 |
| 16 x 16 | 0.023 | 0.58 | 0.04 | 1 | 39.9 | 54.3 |
| 20 x 20 | 0.021 | 0.53 | 0.029 | 0.74 | 33.6 | 56.6 |
| 30 x 30 | 0.015 | 0.38 | 0.018 | 0.47 | 30.3 | 43.3 |
| 35 x 35 | 0.014 | 0.36 | 0.015 | 0.37 | 26 | 44 |
| 40 x 40 | 0.012 | 0.31 | 0.013 | 0.33 | 27 | 36.9 |
| 50 x 50 | 0.011 | 0.28 | 0.009 | 0.229 | 20.3 | 38.8 |
| 50 x 50 | 0.0055 | 0.14 | 0.015 | 0.37 | 52.6 | 9.7 |
| 60 x 60 | 0.011 | 0.28 | 0.0057 | 0.144 | 11.6 | 46.6 |
| 60 x 60 | 0.0045 | 0.114 | 0.012 | 0.31 | 53.3 | 7.8 |
| 80 x 80 | 0.007 | 0.178 | 0.0055 | 0.14 | 19.4 | 25.1 |
| 100 x 100 | 0.005 | 0.127 | 0.005 | 0.127 | 25 | 16 |
| 120 x 120 | 0.0042 | 0.107 | 0.0041 | 0.105 | 24.6 | 13.6 |
| 120 x 120 | 0.004 | 0.102 | 0.0043 | 0.11 | 27 | 12.3 |
| 150 x 150 | 0.003 | 0.076 | 0.0037 | 0.093 | 30.3 | 8.7 |
| 180 x 180 | 0.0025 | 0.064 | 0.0031 | 0.078 | 30.3 | 7.2 |
| 200 x 200 | 0.0025 | 0.064 | 0.0025 | 0.064 | 25 | 8 |
| 200 x 200 | 0.0023 | 0.058 | 0.0027 | 0.069 | 29.2 | 6.8 |
| 270 x 270 | 0.0016 | 0.041 | 0.0021 | 0.053 | 32.3 | 4.4 |
| 300 x 300 | 0.0015 | 0.038 | 0.0018 | 0.047 | 30.3 | 4.3 |
| 325 x 325 | 0.0014 | 0.036 | 0.0017 | 0.043 | 29.7 | 4.1 |
| 400 x 400 | 0.001 | 0.025 | 0.0015 | 0.038 | 36 | 2.6 |
Packing: Other specifications according to your requirements.
