Stainless Steel Twill Weave Wire Cloth
Twill Weave Wire Mesh:
Each weft wire passes alternately over two, and then under two
successive warp wires and each warp wire passes alternately over
two and under two successive weft wires. It is possible to be used
to allow a heavier than standard wire diameter.
180 wires per inch. Material can easily bend by hand and cut with
scissors and laser. Commonly used for laboratories, screen
printing, and filters. This market grade mesh is woven from a
standard wire diameter which is heavier than the wire used to weave
bolting cloth.
| Mesh | Weave Pattern | Wire Diameter | Aperture | Open Area Rate |
| mm | Inch | mm | Inch | % |
| 180 | Twilled Weave | 0.05 | 0.0019 | 0.091 | 0.0035 | 41.68 |
| 0.06 | 0.0023 | 0.081 | 0.0031 | 33.03 |
1) Roll Size Roll Width: 36”, 48”, 1.0m Roll Length: 100ft, 30m
2) Cut in Pieces Rectangle shape, square shape, round shape and other required
shapes and sizes. |
Materials: SS304, SS304L, SS316, SS316L
| AISI | Chemical Composition of Several Stainless Steel Wires (%) |
| C | Si | Mn | P | S | Ni | Cr | Mo |
| 304 | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 8.00~10.50 | 18.00~20.00 | - |
| 304L | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 9.00~13.00 | 18.00~20.00 | - |
| 316 | Max.0.08 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 10.00~14.00 | 16.00~18.00 | 2.00~3.00 |
| 316L | Max.0.03 | Max.1.00 | Max.2.00 | Max.0.045 | Max.0.030 | 12.00~15.00 | 16.00~18.00 | 2.00~3.00 |
304 stainless steel: Most common stainless alloy used in wire
weaving. Excellent corrosion properties and can withstand
temperatures of 1100 Degrees F.
304L stainless steel: Similar properties as 304ss but lower carbon
content to permit better welding.
316 stainless steel: Similar properties to 304ss but is stabilized
by the addition of Molybdenum for increased resistance to chemical
corrosion.
316L stainless steel: Similar properties as 316ss but lower carbon
content to permit better welding.
Weaving Type: Twill weave
Characteristics:
Superior corrosion and abrasion resistance;
Can resist to rust and bad weather;
High filter precision;
Durable and high strength;
Beautiful appearance, etc.
Applications:
Fiber Spinning Mesh;
Pharmaceutical Powder Preparation;
Flour Machine Screening;
Oil Filter;
Cement and Lime Selection;
Laboratories and Filters;
Process Screening and Sieving;
Hydraulic Filters;
Internal Combustion Engine Air Filter;
Mulled Wine Filter;
Decorative/Cosmetic Mesh, etc.
Specifications:
| MESH Count | Diameter of Wire | Width of Opening | Open Area | Weight |
| % per | Pounds |
| per Inch | Inches | mm | Inches | mm | 100 Sq. Ft. | per 100Sq.Ft |
| 12 x 12 | 0.032 | 0.81 | 0.051 | 1.3 | 37.9 | 78.8 |
| 14 x 14 | 0.028 | 0.71 | 0.043 | 1.1 | 37 | 70.4 |
| 16 x 16 | 0.023 | 0.58 | 0.04 | 1 | 39.9 | 54.3 |
| 20 x 20 | 0.021 | 0.53 | 0.029 | 0.74 | 33.6 | 56.6 |
| 30 x 30 | 0.015 | 0.38 | 0.018 | 0.47 | 30.3 | 43.3 |
| 35 x 35 | 0.014 | 0.36 | 0.015 | 0.37 | 26 | 44 |
| 40 x 40 | 0.012 | 0.31 | 0.013 | 0.33 | 27 | 36.9 |
| 50 x 50 | 0.011 | 0.28 | 0.009 | 0.229 | 20.3 | 38.8 |
| 50 x 50 | 0.0055 | 0.14 | 0.015 | 0.37 | 52.6 | 9.7 |
| 60 x 60 | 0.011 | 0.28 | 0.0057 | 0.144 | 11.6 | 46.6 |
| 60 x 60 | 0.0045 | 0.114 | 0.012 | 0.31 | 53.3 | 7.8 |
| 80 x 80 | 0.007 | 0.178 | 0.0055 | 0.14 | 19.4 | 25.1 |
| 100 x 100 | 0.005 | 0.127 | 0.005 | 0.127 | 25 | 16 |
| 120 x 120 | 0.0042 | 0.107 | 0.0041 | 0.105 | 24.6 | 13.6 |
| 120 x 120 | 0.004 | 0.102 | 0.0043 | 0.11 | 27 | 12.3 |
| 150 x 150 | 0.003 | 0.076 | 0.0037 | 0.093 | 30.3 | 8.7 |
| 180 x 180 | 0.0025 | 0.064 | 0.0031 | 0.078 | 30.3 | 7.2 |
| 200 x 200 | 0.0025 | 0.064 | 0.0025 | 0.064 | 25 | 8 |
| 200 x 200 | 0.0023 | 0.058 | 0.0027 | 0.069 | 29.2 | 6.8 |
| 270 x 270 | 0.0016 | 0.041 | 0.0021 | 0.053 | 32.3 | 4.4 |
| 300 x 300 | 0.0015 | 0.038 | 0.0018 | 0.047 | 30.3 | 4.3 |
| 325 x 325 | 0.0014 | 0.036 | 0.0017 | 0.043 | 29.7 | 4.1 |
| 400 x 400 | 0.001 | 0.025 | 0.0015 | 0.038 | 36 | 2.6 |
Packing: Other specifications according to your requirements.
