Lock Crimped Wire Mesh
Lock crimped is a refinement of the intermediate crimped. It can
lock the wire at their position through pressed at each side of the
raised wire. This structure can add the stability of the crimped
woven wire mesh.
“Lock crimp” is a crimp type that is commonly employed when woven
wire mesh is manufactured. Similar to intermediate crimp, “lock
crimp” is also comprised of pre-crimped wires. The distinguishing
feature of lock crimp is the bump or knuckle that forms over each
intersecting set of wires. These knuckles lock the mesh in place
and create an extremely rigid product. And finally, the wires on a
lock crimp are straight between intersections, while the wires with
the intermediate crimp are corrugated.
Lock Crimp Wire Meshes are mainly used in the architectural &
decorative industries, for the screen of window, fence and ceiling;
In the mining & aggregate industries, for the quarrying screen of
vibrating machine; In the petrochemical & chemical industries, for
test sieve.
Weave Pattern: Lock Crimped
Material:
Standard materials of flat top crimped wire mesh are low/mild/high
carbon steel and stainless steel 201, 202, 304, 316, 321, 410, 430.
Besides above following material available:
Copper: brass, pure copper, phosphor bronze
Aluminum: 1050, 1060, 1100, 5052, 5056
Nickel: pure nickel, nickel alloy, monel
Features:
Wire diameter and mesh with ratio reasonable;
Flat surface;
Strong wear resistance;
Corrosion and rust resistance;
Acid and alkali resistance;
Pre-weaving crimped wire, with strong structure.
Usage:
Car grille
Architecture
Decorative grill
Vibrating screens
Machine guard
Test sieve
Fence
Specifications:
Opening Sizes: from 4mm to 100mm.
Wire Diameters: from 0.8mm to 4.8mm.
Roll Width: 1m, 1.22m, 1.5m to 4m.
Roll Length: 15m, 30m to 60m.
Panel Width: 0.5m, 0.914m, 1m, 1.22m to 2m.
Panel Length: 1m, 1.22m, 1.5m to 6m.
| Lock Crimp Wire Mesh |
| Opening | Wire Diameter | Open Area |
| mm | Inch | mm | Inch | % |
| 4.0 | 0.157 | 1.0 | 0.039 | 64.00 |
| 0.8 | 0.031 | 69.44 |
| 5.0 | 0.197 | 1.2 | 0.047 | 65.04 |
| 1.0 | 0.039 | 69.44 |
| 0.8 | 0.031 | 74.32 |
| 6.0 | 0.236 | 2.0 | 0.079 | 56.25 |
| 1.8 | 0.071 | 59.17 |
| 1.6 | 0.063 | 62.33 |
| 1.4 | 0.055 | 65.74 |
| 1.2 | 0.047 | 69.44 |
| 1.0 | 0.039 | 73.47 |
| 8.0 | 0.315 | 2.0 | 0.079 | 64.00 |
| 1.8 | 0.071 | 66.64 |
| 1.6 | 0.063 | 69.44 |
| 1.4 | 0.055 | 72.43 |
| 1.2 | 0.047 | 75.61 |
| 1.0 | 0.039 | 79.01 |
| 10.0 | 0.394 | 2.5 | 0.098 | 64.00 |
| 2.0 | 0.079 | 69.44 |
| 1.8 | 0.071 | 71.82 |
| 1.6 | 0.063 | 74.32 |
| 1.5 | 0.059 | 75.61 |
| 1.4 | 0.055 | 76.95 |
| 1.2 | 0.047 | 79.72 |
| 1.0 | 0.039 | 82.64 |
| 12.0 | 0.472 | 4.0 | 0.157 | 56.25 |
| 3.5 | 0.138 | 59.93 |
| 2.6 | 0.102 | 67.55 |
| 1.5 | 0.059 | 79.01 |
| 12.7 | 1/2” | 4.0 | 0.157 | 57.83 |
| 3.5 | 0.138 | 61.46 |
| 3.0 | 0.118 | 65.43 |
| 2.5 | 0.098 | 69.81 |
| 2.0 | 0.079 | 74.64 |
| 1.8 | 0.071 | 76.71 |
| 15.0 | 0.591 | 4.8 | 0.189 | 57.39 |
| 4.5 | 0.177 | 59.17 |
| 4.0 | 0.157 | 62.33 |
| 3.5 | 0.138 | 65.74 |
| 3.0 | 0.118 | 69.44 |
| 2.6 | 0.102 | 72.63 |
| 2.5 | 0.098 | 73.47 |
| 2.0 | 0.079 | 77.85 |
| 19.0 | 0.748 | 4.8 | 0.189 | 63.73 |
| 4.0 | 0.157 | 68.24 |
| 3.5 | 0.138 | 71.30 |
| 20.0 | 0.787 | 4.8 | 0.189 | 65.04 |
| 4.5 | 0.177 | 66.64 |
| 4.0 | 0.157 | 69.44 |
| 3.5 | 0.138 | 72.43 |
| 3.0 | 0.118 | 75.61 |
| 2.5 | 0.098 | 79.01 |
| 2.0 | 0.079 | 82.64 |
| 25.0 | 0.984 | 4.8 | 0.189 | 70.37 |
| 3.5 | 0.138 | 76.94 |
| 3.0 | 0.118 | 79.71 |
| 2.0 | 0.079 | 85.73 |
| 25.4 | 1” | 4.8 | 0.189 | 70.74 |
| 4.5 | 0.177 | 72.16 |
| 4.0 | 0.157 | 74.64 |
| 3.5 | 0.138 | 77.25 |
| 3.0 | 0.118 | 79.99 |
| 2.5 | 0.098 | 82.88 |
| 30.0 | 1.181 | 4.8 | 0.189 | 74.32 |
| 4.5 | 0.177 | 75.61 |
| 4.0 | 0.157 | 77.85 |
| 3.5 | 0.138 | 80.20 |
| 3.0 | 0.118 | 82.64 |
| 2.5 | 0.098 | 85.21 |
| 38.1 | 1-1/2” | 4.8 | 0.189 | 78.87 |
| 4.5 | 0.177 | 79.99 |
| 4.0 | 0.157 | 71.90 |
| 3.5 | 0.138 | 83.88 |
| 3.0 | 0.118 | 85.93 |
| 2.5 | 0.098 | 88.06 |
| 50.8 | 2” | 4.8 | 0.189 | 83.48 |
| 4.5 | 0.177 | 84.39 |
| 4.0 | 0.157 | 85.93 |
| 3.5 | 0.138 | 87.52 |
| 3.0 | 0.118 | 89.16 |
| 70.0 | 2.756 | 4.8 | 0.189 | 87.58 |
| 76.2 | 3” | 4.8 | 0.189 | 88.50 |
| 4.5 | 0.177 | 89.16 |
| 4.0 | 0.157 | 90.27 |
| 3.5 | 0.138 | 91.41 |
| 88.9 | 3-1/2” | 3.5 | 0.138 | 92.57 |
| 101.6 | 4” | 4.8 | 0.189 | 91.18 |
Other Specifications according to your requirements.
Packing
